Mixing vessel - メーカー・企業と製品の一覧

Mixing vesselの製品一覧

1～13 件を表示 ／ 全 13 件

表示件数
[Example] 400L Jacketed Container with Mixer, Temperature Control, Frame, and Piping

[Example] 400L Jacketed Container with Mixer, Temperature Control, Frame, and Piping

Containers, pumps, and control panels on a single cart! Circulates warm water to maintain the internal solution at a constant temperature.

We would like to introduce a case where we manufactured custom storage and discharge containers at the request of a food manufacturer. A 400L stainless steel jacketed container was equipped with a stirrer, pump, and level sensor. Hot water is circulated within the jacket using a temperature control unit to maintain the internal solution at a constant temperature. By placing the container, pump, and control panel on a single cart, it is made easy to move. [Case Overview] - Connect an external temperature sensor to the temperature control unit to manage the temperature of the internal solution, and use the stirrer to ensure uniform temperature by keeping the solution in motion. - By using an ultrasonic level sensor, the level can be measured without contact with the internal solution. - The pump is used for transferring liquid to the next process. - The control panel manages the ON/OFF operation and speed adjustment of the pump and stirrer, as well as displays the liquid level. *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Example] 20L Jacket Tank Mixer with Cart and Support Frame

[Example] 20L Jacket Tank Mixer with Cart and Support Frame

A cart with handles makes it easy to move between production equipment! The air motor is designed to be explosion-proof and difficult to ignite!

We would like to introduce a case where we manufactured custom storage and discharge containers at the request of a pharmaceutical manufacturer. This is a jacketed stirring container with a cart, equipped with an air motor that is designed to be difficult to ignite for explosion-proof compliance. The cart's basin has an outlet for discharging accumulated liquid from cleaning the container and other purposes. 【Case Overview】 ■ The contents are heated by the jacket while being mixed by the air motor stirrer. ■ The air motor is designed to be difficult to ignite for explosion-proof compliance. ■ A full-bore ball valve attached to the drain allows for smooth discharge of the contents. ■ The cart's basin is equipped with an outlet for discharging accumulated liquid. ■ The cart has handles, making it easy to move between production equipment. *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed via "PDF Download."

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study of Stirring Temperature Control Unit] Adopted for heating and stirring liquids.

[Case Study of Stirring Temperature Control Unit] Adopted for heating and stirring liquids.

To ensure smooth discharge of the contents, a single tapered design with the bottom of the container slanted towards the discharge side has been adopted!

We would like to introduce a case where a stainless steel stirring and temperature control unit was adopted for heating and stirring liquids in the chemical industry. The unit heats the liquid using a heater inserted into the jacket section and mixes it with a stirrer installed at the top. A thermometer is attached to allow for temperature monitoring of the liquid inside. Additionally, to ensure smooth discharge of the liquid, a single tapered design is employed, with the bottom of the container sloping towards the discharge side. 【Case Overview】 ■ Dimensions: Inner diameter of the container φ565mm × Height H1050mm (excluding stirrer base) ■ Container Material: SUS304 ■ Capacity: 150L *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
【Examples of Using Stirring Temperature Control Units】 Adopted for Wax Melting and Heat Retention

【Examples of Using Stirring Temperature Control Units】 Adopted for Wax Melting and Heat Retention

By installing an insulation cover, it enhances heat retention and contributes to preventing burns for workers!

We would like to introduce a case where a stainless steel stirring and temperature control unit was adopted for the melting and heating of wax in the chemical industry. After heating the white solid wax to liquefy it, the unit supplies the wax to the machine that applies it. A heater inserted into the jacket section warms the water in the jacket, heating the contents like a double boiler. The stirring paddle features anchor wings suitable for the container's shape. It forcibly moves the contents from the bottom of the container to the walls, allowing for liquefaction while preventing the wax from sticking. 【Case Overview】 ■ Dimensions: Inner diameter of the container φ565mm × Height H2200mm (when the stirrer is installed) ■ Container Material: SUS304 ■ Capacity: 150L (Effective capacity 125L) ■ Heater Output: 7.5kW ■ Power Supply: 3-phase 200V ■ Temperature: Room temperature to 80℃ *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
【Examples of Stirring Temperature Control Unit】 Adopted for dissolving and degassing powders and liquids.

【Examples of Stirring Temperature Control Unit】 Adopted for dissolving and degassing powders and liquids.

The inside of the container can be checked through the viewing window installed on the lid! The bubbles generated during stirring are removed by reducing the pressure.

We would like to introduce a case where a stainless steel stirring and temperature control unit was adopted for the dissolution and degassing of powders and liquids in the pharmaceutical industry. This unit combines a magnetic stirrer, a constant temperature water circulation device, and peripheral equipment such as pumps within a pressure vessel. Powder materials are gradually fed into the container filled with liquid from the upper eccentric hopper and stirred. The feed material is heated and temperature-controlled with warm water circulated in the jacket, mixed with the upper and lower stirrers, and the completed solution is pumped to other equipment through a tube strainer from the bottom valve of the tank. 【Case Overview】 ■ Dimensions: Inner diameter of the container φ396 × height H1680mm (when stirrer is installed) ■ Material: SUS316L ■ Capacity: 30L ■ Pressure resistance: -0.1MPa to 0.18MPa *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Easy-to-Clean Opening and Closing Lid

[Case Study] Easy-to-Clean Opening and Closing Lid

For stirring tanks with immersion heaters! A case where the risk of contamination during medium preparation has been reduced.

This is a custom case of a lid for a stirring tank used for culture liquid (water + powder) supplied to a pharmaceutical manufacturer. The customer used a standard tapered container and a standard sealed lid as an accessory. However, since there was no opening in the lid, it was necessary to open the lid every time a submersible heater or stirrer was used, which made work difficult. Therefore, a specification for an easy-to-clean opening and closing lid was adopted. This design suppresses the scattering of powder when adding it, allowing the stirrer and submersible heater to be used without having to keep the lid open. [Issues] - The customer used a standard tapered container and a standard sealed lid as an accessory. - Since there is no inlet in the lid, the lid must be removed when adding powdered materials, causing the lid to open fully and resulting in powder scattering. - Because there is no opening in the lid, it is necessary to open the lid every time a submersible heater or stirrer is used, making work difficult. *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Temperature Control Unit with Jacketed Stirring Vessel

[Case Study] Temperature Control Unit with Jacketed Stirring Vessel

Heating with steam is also possible! A case study that adopts a "separate type" to reduce total costs.

This is a custom-made case of a container capable of stirring 100L of liquid containing insoluble powder delivered to a pharmaceutical manufacturer. When there is a need to heat the inside of the container with warm water while stirring, it is common to propose a combined stirring and temperature control unit like the "HU" heater unit. However, in this product, a separate type has been adopted. The temperature control unit is mounted on a cart, making it easy to move to the required process. Although it incurs higher costs compared to an integrated stirring and temperature control container, it can lead to reduced equipment costs in the long run. [Case Overview] - Composed of a jacketed stirring container and a temperature control unit (warm water circulation device). - A manual tank ball valve is used for the outlet. - A Bernoulli flow stirrer is adopted, which is less likely to incorporate air and allows for uniform stirring. - The standard controller makes it easy to change the rotation speed. - Both the stirring container and temperature control unit are equipped with "ECK" insulation covers. *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Example] Stirring machine, frame, jacketed mixing container

[Example] Stirring machine, frame, jacketed mixing container

The upper part is equipped with a handle! The frame includes handles, movable casters, and mounting brackets for the stirrer.

We would like to introduce a case where we manufactured custom storage and discharge containers at the request of a pharmaceutical manufacturer. Raw materials are loaded through a top-opening lid and discharged from the bottom to manufacturing equipment at the destination. The frame is equipped with handles, movable casters, and brackets for a stirrer, while the top features a temperature sensor and a ferrule for introducing chemicals. [Case Overview] - A jacket is attached to the bottom container to stir and mix chemicals at a constant temperature. - The frame includes handles, movable casters, and brackets for a stirrer. - The top is equipped with a temperature sensor and a ferrule for introducing chemicals. *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Example] Pressure-adjustable jacketed container with magnetic stirrer

[Example] Pressure-adjustable jacketed container with magnetic stirrer

The state inside the container can be checked through a viewing window with a light and wiper! Introducing examples of pressure vessels.

We would like to introduce a case where a custom pressure vessel was manufactured at the request of a pharmaceutical manufacturer. This vessel is designed to dissolve powders and liquids, degas, and transfer the mixture to other equipment. The condition inside the vessel can be checked through a viewing window, which is equipped with a light for illumination and a wiper. 【Case Overview】 - Powder materials are gradually fed into the liquid inside the vessel from an eccentric hopper with a butterfly bubble. - The fed contents are heated with warm water circulated through a jacket. - The heated contents are mixed using upper and lower stirrers. - Bubbles formed during stirring are degassed under reduced pressure. - The resulting solution is transferred to other equipment through a tube strainer. *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed via "PDF Download."

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Example] Open-type pressure vessel with magnetic stirrer and dedicated cart.

[Example] Open-type pressure vessel with magnetic stirrer and dedicated cart.

The magnetic stirrer is seal-less and insulated from the outside air! It is equipped with small casters for rollover prevention.

We would like to introduce a case where we manufactured a custom pressure vessel at the request of a chemical fiber manufacturer. This is a jacketed stirring vessel with a cart that allows for the introduction of chemicals without exposure to the outside air. After stirring and defoaming under reduced pressure, the chemicals are pumped from the bottom of the tank. The cart designed specifically for factory equipment has narrow caster widths, and small casters are added for rollover prevention. 【Case Overview】 - Chemicals are introduced without exposure to the outside air, stirred, and after defoaming under reduced pressure, the chemicals are pumped from the bottom of the tank. - The stirred and defoamed chemicals are transported to the manufacturing equipment using the cart, and the chemicals are pumped. - The cart designed specifically for factory equipment has narrow caster widths, and small casters are added for rollover prevention. *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
【Examples of Stirring Temperature Control Unit】Adopted for the production of binder liquid.

【Examples of Stirring Temperature Control Unit】Adopted for the production of binder liquid.

The mixer and immersion heater can be installed in the container at the same time! You can stir while heating.

We would like to introduce a case where a stainless steel stirring temperature control unit was adopted for the production of binder liquids in the chemical industry. To shorten the dissolution time, a direct immersion heater was used instead of heating the liquid through a jacket. The lid features notches for the stirrer, an opening and closing section for the immersion heater, an opening and closing section for material addition and internal inspection, and processing for a helix. 【Case Overview】 ■Dimensions: Container inner diameter φ565mm × Height H1095mm (excluding stirrer base) ■Material: SUS304 ■Capacity: 150L *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Example] DTK-J-100 Mixer with temperature control, frame, and piping included

[Example] DTK-J-100 Mixer with temperature control, frame, and piping included

By using an ultrasonic level sensor, it is possible to measure the level without contact with the liquid!

We would like to introduce a case where a "stainless steel container pump unit" used as a temporary receptacle for edible oil was custom-made and delivered to a food manufacturer. A stirring machine, pump, and level sensor were installed in a 400L stainless steel jacket container. An external temperature sensor was connected to a temperature control device to manage the temperature of the internal solution, and the stirring machine circulates the internal solution to achieve a uniform temperature. 【Features】 ■ The temperature control device circulates warm water in the jacket to keep the edible oil at a constant temperature. ■ An ultrasonic level sensor is used to measure the level without contact with the contents. ■ The pump is used for transferring liquid to the next process. ■ The control panel manages the ON/OFF and speed adjustment of the pump and stirring machine, as well as displays the liquid level. ■ To facilitate mobility, the container, pump, and control panel are mounted on a single cart. *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed via "PDF Download."

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Example: Container with sticker application base.

Example: Container with sticker application base.

Prevention of foreign matter contamination such as adhesives! Can be nested for storage when empty, saving space!

We would like to introduce a case where we custom-made a "container with a seal application seat" and delivered it to a food manufacturing company. The seal seat has a fluororesin coating on the surface where the label is applied. Since there is no adhesive residue and it can be peeled off, it prevents foreign matter contamination from adhesives and similar substances. Additionally, in the standard specification, the clips interfere with the bottom of the container, making stacking impossible. Therefore, we have adjusted the position of the clips to allow for stacking. 【Features】 ■ Seal seat: The surface for label application has a fluororesin coating ■ Lid with pegs: The top surface of the lid is processed with pegs (protrusions) ■ Hook for clips: Designed for stacking ■ Tapered shape: Can be nested for storage when empty ■ Round rod handle: Easy to clean as dirt and liquids do not enter *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed via "PDF Download."

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Mixing vesselの関連カテゴリ

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.